How to:
You many need to buy 1/2 a sheet of dry wall if you can not find a small piece.

1) check for wiring or plumbing in the section of wall.
2) cut a rectangular hole in the dry wall.
3) Cut to the stud on the right and left of the hole.
4) Cut a piece of dry wall to fit into the hole.
5) Mount the piece of dry wall into the hole, with drywall nails or preferably dry wall screws.
6) make sure the heads are below the surface of the wall.
7) Tape the wall, using mesh tape.
8) plaster over the cracks.
9) sand excess
10) apply second coat of plaster
11) sand excess
12) apply third coat
13) sand excess
14) run from mate with vacuum and white power on face.

Reply

Quote Reply

Digg It

Del.icio.us